Metal Roof Replacement in Edmond, OK
Thinking about a metal roof replacement in Edmond, OK? Our site, Roof Replacement Edmond OK, is a free referral service that never does roofing work itself. Share a few details and we pass them to one independent local roofer, who can look at your roof and price standing-seam metal for you in writing.
Prefer to talk? Call now(405) 555-0174Not sure if we cover your area? Check now ↓
Free Inspection Request
Takes 30 seconds, or call (405) 555-0174
Your details go to one independent roofer who works in and around Edmond, who contacts you directly. See our Referral Marketing Disclosure.
Metal Roof Replacement Basics
Standing-seam metal is made of long panels that run from the ridge to the eaves. The panels lock together at raised seams, and the fasteners sit under those seams instead of through the face of the metal. Other metal styles, such as exposed-fastener panels, are screwed through the face. Ask which kind any estimate is pricing.
Edmond is a big city: 84.62 square miles and about 100,479 residents in the 2025 Census estimate. Whatever your house looks like, metal costs more per square foot than shingles, so your roof's area is the biggest factor in whether it fits the budget.
Storms factor in too. NWS Norman logged hail up to 2.00 inches around Edmond on April 19, 2023, and 70 mph winds about 6 miles west-northwest of town on May 15, 2024. Metal can still dent in hail, so ask the roofer what the panel's impact rating is and what its warranty says about dents.
What This Covers
- Old roof removed. Edmond's re-roof guidance calls for every existing layer to come off on a replacement, so the metal goes onto a sound deck.
- Deck work. Rotted boards are swapped out, and new OSB or plywood can go over wide plank decking if needed.
- Underlayment. A layer under the panels, with ice and water shield in the valleys and where the pitch changes.
- Panels and trim. Standing-seam panels, ridge cap, eave and rake trim, cut and fit to your roof.
- Flashing. New flashing at walls, pipes and chimneys, plus a cricket behind any chimney wider than 30 inches.
- Drip edge. Metal edging at the eaves so runoff lands in the gutters.
Rough Numbers for Metal Roof Replacement
Standing-seam metal sits at the top of the published ranges. Each row shows its source and year. These are estimates; the roofer's written estimate sets your price.
| Cost row | Figure | Source (year) |
|---|---|---|
| Oklahoma 2,000 sq ft roof, architectural | $9,000–$13,000 | askdoss, 2026 |
| Edmond re-roof, per sq ft | $5–$7 | Homeyou, 2026 |
| Oklahoma architectural shingles, per sq ft | $4.50–$6.50 | askdoss, 2026 |
| Oklahoma Class 4 shingles, per sq ft | $5.50–$8.00 | askdoss, 2026 |
| Oklahoma standing-seam metal, per sq ft | $8.00–$14.00 | askdoss, 2026 |
Pick "Metal" in the roof cost calculator to see a range for your home's size, stories and steepness. The cost guide explains what pushes a price up or down.
Step by Step
- Call (405) 555-0174 or use the form. Your request goes to one independent local roofer, and the referral is free.
- The roofer measures the roof, checks the deck from the attic where it can, and talks through panel types and colors.
- You receive a written, itemized estimate. Ask it to list panel gauge, underlayment, trim, flashing and deck repair on separate lines.
- Get the roofer's CIB registration number; Oklahoma numbers begin with "OK", and the Construction Industries Board can confirm one.
- Get proof of general liability insurance, at least $500,000 for residential work, and look for workers' comp wording in the contract.
- The roofer deals with any permit, then removes the old roof and installs the metal.
- Keep the panel maker's warranty in writing, including what it says about dents and finish.
What You Get Up Front
You talk to one roofer, not a list of strangers. Roofers may pay us for each referral, while the connection never costs you a cent.
We don't sell panels, write bids or sign contracts. Your agreement and your warranty sit between you and the roofer you choose to hire.
Questions Worth Asking
Is metal worth the extra cost over shingles?
It depends on how long you plan to stay and what you want from the roof. In the rows above, standing-seam metal runs $8.00–$14.00 per square foot against $4.50–$6.50 for architectural shingles (askdoss, 2026). Ask the roofer to price both on the same estimate so you can compare them line by line.
Can metal go right over my old shingles in Edmond?
Not on a replacement: Edmond's storm and re-roof guidance requires stripping every old layer first. The city works from the 2018 International Residential Code, and its rules apply even without a permit. Building & Safety's FAQ adds that a residential re-roof needs no city permit or inspection, but rules change, so confirm with Building & Safety at (405) 359-4780.
Will a metal roof lower my insurance?
That's up to your insurer. Many insurers offer a discount for a Class 4 or FORTIFIED roof; ask yours, and ask whether the panel you're considering qualifies. Get the answer before you sign, so it can shape your choice of material.
My address says Edmond. Could different permit rules apply?
Possibly. A house can carry an Edmond mailing address yet may lie within Oklahoma City limits, and Oklahoma City requires a roofing permit. Check which city your address is in. Whatever the answer, the roofer pulls any permit, not you.
Related Roof Jobs
Still deciding? Compare shingle roof replacement, read about a full roof replacement, or see the storm and hail damage page if a recent storm started all this.
Compare Metal Against Shingles
Want both options priced? Phone (405) 555-0174 or fill in the form, and one independent Edmond-area roofer will get your details. It can inspect for free and quote metal and shingles side by side, in writing.